Power Terminal Board w/Mount
Expand the number of V+ or 5v+ outs with this product! This power terminal board allows you to conveniently connect up to 8 wires together via screw terminals. This is a great installation aid, especially for systems such as Blunami or RailPro that only have one or two power output terminals for lighting, etc. You simply run one wire from the V+ terminal (or 5v+ terminal, whichever you may be using) on your module to this power terminal board, then you connect the positive side of your lighting to this board. The included mount (3D printed with ASA) allows you to utilize factory screws to secure it down to the chassis or shell.
Comes with the terminal board, mount, and two screws (to secure the board to the mount). Dimensions: 30mm wide, 30mm long, 19mm tall (assembled). Please allow 3 days for processing as orders are often 3D printed upon ordering.
Please Note: As with all 3D printed parts, there may be slight differences in the finish between the photos shown and the product received. If you have any concerns at all, always please reach out directly to us!
Expand the number of V+ or 5v+ outs with this product! This power terminal board allows you to conveniently connect up to 8 wires together via screw terminals. This is a great installation aid, especially for systems such as Blunami or RailPro that only have one or two power output terminals for lighting, etc. You simply run one wire from the V+ terminal (or 5v+ terminal, whichever you may be using) on your module to this power terminal board, then you connect the positive side of your lighting to this board. The included mount (3D printed with ASA) allows you to utilize factory screws to secure it down to the chassis or shell.
Comes with the terminal board, mount, and two screws (to secure the board to the mount). Dimensions: 30mm wide, 30mm long, 19mm tall (assembled). Please allow 3 days for processing as orders are often 3D printed upon ordering.
Please Note: As with all 3D printed parts, there may be slight differences in the finish between the photos shown and the product received. If you have any concerns at all, always please reach out directly to us!
Expand the number of V+ or 5v+ outs with this product! This power terminal board allows you to conveniently connect up to 8 wires together via screw terminals. This is a great installation aid, especially for systems such as Blunami or RailPro that only have one or two power output terminals for lighting, etc. You simply run one wire from the V+ terminal (or 5v+ terminal, whichever you may be using) on your module to this power terminal board, then you connect the positive side of your lighting to this board. The included mount (3D printed with ASA) allows you to utilize factory screws to secure it down to the chassis or shell.
Comes with the terminal board, mount, and two screws (to secure the board to the mount). Dimensions: 30mm wide, 30mm long, 19mm tall (assembled). Please allow 3 days for processing as orders are often 3D printed upon ordering.
Please Note: As with all 3D printed parts, there may be slight differences in the finish between the photos shown and the product received. If you have any concerns at all, always please reach out directly to us!