Replacement 3D printed stationary side steam pipes for the USA Trains Big Boy. Printed in ASA to withstand the outdoors. Comes as a set with QTY 1 Left and QTY 1 Right stationary steam pipes. These come raw off the printer. They can be installed raw, or you may sand, prime and paint (recommended - see example image of what they look like sanded and painted). Uses stock hardware (not included). To install, you will need to fit them in place, mark and drill the screw hole for the mounting ear.
Please allow 7 days for printing/processing. As with all 3D printed parts, there may be slight differences in the finish between the photos shown and the product received. If you have any concerns at all, always please reach out directly to us!
Replacement 3D printed stationary side steam pipes for the USA Trains Big Boy. Printed in ASA to withstand the outdoors. Comes as a set with QTY 1 Left and QTY 1 Right stationary steam pipes. These come raw off the printer. They can be installed raw, or you may sand, prime and paint (recommended - see example image of what they look like sanded and painted). Uses stock hardware (not included). To install, you will need to fit them in place, mark and drill the screw hole for the mounting ear.
Please allow 7 days for printing/processing. As with all 3D printed parts, there may be slight differences in the finish between the photos shown and the product received. If you have any concerns at all, always please reach out directly to us!
