Add more lighting to make your locomotive look prototypical and light up the night! Comes with two ground lights as pictured (one for each side to be placed under the cab). See the example installation photo on this listing. Please allow 3 days for processing as orders are often 3D printed upon ordering.
DIY - Assembly Required: Comes with two custom designed 3D printed (PETG) housings, warm white LED’s, and 1k ohm resistors. Requires user to set the LED’s in the housings, install the resistors, and do their own wiring. Must be comfortable with soldering, but this allows for the most flexibility in your custom install!
Please Note: As with all 3D printed parts, there may be slight differences in the finish between the photos shown and the product received. If you have any concerns at all, always please reach out directly to us!
Add more lighting to make your locomotive look prototypical and light up the night! Comes with two ground lights as pictured (one for each side to be placed under the cab). See the example installation photo on this listing. Please allow 3 days for processing as orders are often 3D printed upon ordering.
DIY - Assembly Required: Comes with two custom designed 3D printed (PETG) housings, warm white LED’s, and 1k ohm resistors. Requires user to set the LED’s in the housings, install the resistors, and do their own wiring. Must be comfortable with soldering, but this allows for the most flexibility in your custom install!
Please Note: As with all 3D printed parts, there may be slight differences in the finish between the photos shown and the product received. If you have any concerns at all, always please reach out directly to us!
